碳酸盐岩岩溶储层多井评价方法及地质应用

多井评价是建立在单井精细解释对比分析基础上的预测储层及含油气性平面分布规律的技术方法,而常规测井资料无法区分碳酸盐岩岩溶储层,因而利用多井评价结果确定岩溶发育程度在平面上的分布规律就显得十分重要。为此,在岩心标定成像测井的基础上,对四川盆地高石梯—磨溪地区15口井的成像测井岩溶发育特征进行分析,建立了中二叠统茅口组岩溶发育各分带的标准成像图版,利用交会图及直方图分析各分带的常规测井响应特征,在此基础上形成了电成像测井刻度常规测井识别岩溶发育带的新方法。研究结果表明:①高石梯—磨溪地区茅口组岩溶带自上而下可划分为风化壳残积带、垂直渗流岩溶带、水平潜流岩溶带以及受岩溶作用较弱的基岩;②风化壳残积带在成像测井图像显示为"暗—亮—暗"条带状模式,垂直渗流岩溶带为垂直线状与暗色斑状组合模式,水平潜流岩溶带为水平线状—层状与斑状组合模式,基岩整体显示为亮色块状模式偶见线状或斑状特征;③有效储层主要发育在垂直渗流带和水平潜流带的顶部;④该区茅口组岩溶发育主要受裂缝发育控制,而裂缝发育又与断层关系密切。结论认为,该新方法对碳酸盐岩岩溶储层的多井评价具有普遍适用性,为四川盆地中二叠统风险探井的部署提供了技术支撑。     

Molecular Dynamics Simulation on the Effect of MgO/Al2O3 Ratio on Structure and Properties of Blast Furnace Slag Under Different Basicity Conditions

Metallurgical and Materials Transactions B - The SiO2-Al2O3-CaO-MgO is the basic structural system of blast furnace slag and the composition directly affects the performance of the slag. Molecular...     

A Thermo‐ and Moisture‐Responsive Zwitterionic Shape Memory Polymer for Novel Self‐Healable Wound Dressing Applications

Developing wound dressings that have strong adhesion strength without causing any conglutination to the wound site is still challenging. Herein, is proposed that zwitterionic shape memory polymers can be applied as promising candidates for wound dressing. Sulfobetaine methacrylate (SBMA) is copolymerized with 2,3‐dihydroxypropyl methacrylate (DHMA) in the presence of boric acid as a cross‐linking agent. The prepared material exhibits multi‐stimuli responsive shape memory behaviors: it can rapidly return to its initial shape upon heating to 90 °C, and a gradual recovery is also observed by absorbing moisture in humid environments. The shape memory effect can be well adjusted via incorporation of sodium chloride to induce the dissociation of electrostatic interactions between PSBMA chains, leading to reduced transition temperature and faster shape recovery rate. Moreover, the dynamic nature of boron ester bonds and electrostatic interaction endows the material with effective and rapid self‐healing ability. It is also demonstrated that the deployment process of the dressing that a sample with an initially circular shape can perfectly fit and tightly bind to the wound site after moisture‐induced shape recovery. The proposed zwitterionic polymer can possibly extend the application scope of shape memory polymers and pave a new way for the design of wound dressings.     

不同类型断层控制油气垂向富集的差异——以渤海湾盆地歧口凹陷歧南斜坡区为例

渤海湾盆地历经多期构造变动，断层圈闭发育普遍。断层作为断层圈闭的边界条件，在油气成藏过程中起着至关重要的作用。以断层圈闭较发育的歧南斜坡区为例分析了同向断层和反向断层控制油气垂向富集的差异，基于三维地震资料，从断层形成过程和断层圈闭分布出发，剖析了断层遮挡圈闭的成因及分布规律。结合油水分布规律，基于油藏解剖并应用储层定量荧光技术明确了不同类型断层控藏的差异及其形成机理。研究表明：①断层分段生长作用和断层上盘与下盘的差异活动是同向断层控制下断层遮挡圈闭形成的主要原因，斜坡区反向断层控制形成的断层圈闭则是断块掀斜翘倾作用所致；②同向断层圈闭发育在断层上盘分段点位置，只有当同向断层进入"硬连接"阶段方可形成断层圈闭，反向断层圈闭形成在断层下盘，在反向断层活动初期便可形成；③同向断层既可以控制油气在多套含油气系统中聚集成藏，也可在一套含油气系统中富集，而反向断层往往控制油气在一套含油气系统中富集；④不同类型断层控制油气垂向聚集的差异与圈闭发育位置以及断-盖配置有关。采用泥岩涂抹系数对沙河街组一段中部盖层控制的含油气系统的垂向调整进行定量评价，泥岩涂抹系数低于3.5时油气保存，泥岩涂抹系数高于3.5时油气垂向渗漏。     

Engineering the Structure of Mesoporous Bioactive Glass Microspheres by the Surface Effect of Inverse Opal Templates and Temperature

The interactions of ions and molecules with material surface are highly dependent on the surface properties of the material. Therefore, the distribution of ions or molecules near the material surface may be affected by the surface properties. This phenomenon can be significant enough for controlling the structure of a material synthesized in the sub‐micrometer scale confinement space of a template. This work confirms that inverse opals are perfect templates for offering confinement space, while their different surface properties can strongly affect ion and block copolymer distribution in the confinement space. This surface effect principle can be used for the controlled synthesis of colloids with complex composition. As an example, four kinds of mesoporous magnetic bioactive glass colloids with ordered mesopores, core–shell structure, open surface pores, or disordered mesopores are prepared by using polystyrene and carbon inverse opal templates. This work reveals that inverse opal templates possess great advantage in controlled synthesizing colloidal structures due to their surface effect on ions and molecules and confinement space.     

罩式退火温度对高强IF钢组织及性能的影响

为研究不同退火温度下高强IF钢的组织性能及织构的变化规律,采用温箱式电阻炉加热模拟罩式退火工艺,研究了不同退火温度下高强IF钢210P1冷轧板力学性能;对不同退火温度钢板的r90进行了统计并对其进行显微组织观察;采用X射线衍射仪及热场发射扫描电镜对不同退火温度的罩式退火成品板进行了织构分析。结果表明,在高强IF钢210P1冷轧板的罩式退火过程中,提高退火温度将使晶粒明显长大。随着退火温度的升高,屈服强度及抗拉强度下降,伸长率升高,n值略有上升,板材横向r值增加较明显,有利织构{111}取向密度增加,不利织构{100}取向密度降低。     

A Versatile Theranostic Nanoemulsion for Architecture‐Dependent Multimodal Imaging and Dually Augmented Photodynamic Therapy

To design a clinically translatable nanomedicine for photodynamic theranostics, the ingredients should be carefully considered. A high content of nanocarriers may cause extra toxicity in metabolism, and multiple theranostic agents would complicate the preparation process. These issues would be of less concern if the nanocarrier itself has most of the theranostic functions. In this work, a poly(ethylene glycol)‐boron dipyrromethene amphiphile (PEG‐F₅₄‐BODIPY) with 54 fluorine‐19 (¹⁹F) is synthesized and employed to emulsify perfluorohexane (PFH) into a theranostic nanoemulsion (PFH@PEG‐F₅₄‐BODIPY). The as‐prepared PFH@PEG‐F₅₄‐BODIPY can perform architecture‐dependent fluorescence/photoacoustic/¹⁹F magnetic resonance multimodal imaging, providing more information about the in vivo structure evolution of nanomedicine. Importantly, this nanoemulsion significantly enhances the therapeutic effect of BODIPY through both the high oxygen dissolving capability and less self‐quenching of BODIPY molecules. More interestingly, PFH@PEG‐F₅₄‐BODIPY shows high level of tumor accumulation and long tumor retention time, allowing a repeated light irradiation after a single‐dose intravenous injection. The “all‐in‐one” photodynamic theranostic nanoemulsion has simple composition, remarkable theranostic efficacy, and novel treatment pattern, and thus presents an intriguing avenue to developing clinically translatable theranostic agents.     

Development of microbially influenced corrosion on carbon steel in a simulated water injection system

Microbially influenced corrosion (MIC) on internal pipeline surfaces has become a severe problem during the water injection process in secondary oil recovery. The formation of a biofilm, normally dominated by sulfate‐reducing bacteria (SRB), is believed to be the critical step of the MIC process. A continuously fed biofilm simulating the water injection process was operated to investigate the influence of biofilm development on MIC behavior in the early phase of corrosion development. The development of the corrosion product film and biofilm was monitored for 5 months with electrochemical impedance spectroscopy, linear polarization resistance, scanning electron microscopy, 3D optical profiling, and direct weight measurement. MIC development was found to comprise three phases: initialization, transition, and stabilization. The initialization phase involved the formation of the corrosion product layer and the initial attachment of the sessile microbes on metal surface. In the transition phase, the MIC process gradually shifted from charge‐transfer‐controlled reaction to diffusion‐controlled reaction. The stabilization phase featured mature and compact biofilm on the metal surface, and the general corrosion rate (CR) decreased due to the diffusional effect, while the pitting CR was enhanced at a lower carbon source level, which supported the mechanism of direct electron uptake from the metal surface by SRB.     

高光谱激光雷达谱位合一的角度效应分析

高光谱激光雷达以其谱位合一的技术优势为实现超三维精准遥感观测提供了可行途径,因此成为当前激光雷达与高光谱遥感领域共同大力推进的前沿发展方向。目前已有多型原型系统研发出来并得到了原理性验证,然而针对其数据处理核心环节问题的基础技术仍较为欠缺。典型问题之一是不同波段回波信号受激光入射角度的影响,该角度效应限制了高光谱激光雷达实现高性能遥感。以芬兰空间信息研究所高光谱激光雷达原型系统扫描桦树树干为例探讨了该角度效应,发现了不同激光波段对不同入射角度的回波强度响应模式,推导出了角度效应的基本规律及其精细尺度的统计规律,为后续该方向的系统研发、数据处理及信息提取等提供了可借鉴的底层机理与技术基础。     

基于微型塌落筒和稠度漏斗的膏体充填料浆流变参数预测研究

充填料浆流变参数的准确测定是合理评价其管道输送特性的关键，目前充填料浆流变参数主要采用流变仪测试，工程适用性较差。基于圆锥塌落筒模型和圆柱塌落筒模型，结合流变仪测试，对比分析了不同形状尺寸塌落筒测试屈服应力的准确性，确定了微型塌落筒最佳形状尺寸为柱形 100 mm×100 mm；在此基础上构建了屈服应力-塌落度关系模型，经验证在无量纲屈服应力范围为 0~0.1 时该模型可以准确计算料浆屈服应力；通过自制稠度漏斗测试充填料浆流出时间，探索流变仪测试塑性粘度与流出时间关系，结果表明相同质量浓度时，料浆流出时间与其塑性粘度呈负相关关系，料浆质量浓度变化时其流出时间与塑性粘度关系不明显。